ALERT: What is a Corflo PEG J Bel clamp and what should I do if it is broken?

Connected Care Quick Hits are up to date and evidence based recommendations for the care of children with medical complexity & technology dependence, from hospital to home.

---

ALERT: What is a Corflo PEG J Bel clamp and what should I do if it is broken? 

SITUATION: 

This QuickHit was informed by family caregivers who have initiated consults through Connected Care Live for support when the Bel clamp on their child’s Corflo PEG J breaks or comes apart. 

BACKGROUND:

Many children with medical complexity rely on enteral feeding tubes to support nutrition, hydration and/or medication administration. Combination G/GJ tubes, such as the Corflo PEG J, provide fluids, nutrition and medication directly to the small intestine (jejunum), while still providing access to the stomach for venting. 

The Corflo PEG J tube is a combination of two separate tubes: 

• Corflo PEG tube – a type of G tube that allows access to the stomach. This is the gastric (G) part of the tube and is usually used for venting (accessed via the orange cap in image).

• Silastic tube – threaded through the Corflo PEG tube and placed in the jejunum. This is the gastrojejunal (GJ) part of the tube and is used for fluids, nutrition and medication (accessed via the purple caps in image).

The Bel clamp is a 3D printed, white plastic securement device that holds the silastic GJ tube in place. It prevents the GJ tube from being dislodged out of the Corflo PEG tube. The design has been adapted for use with ENFit products. 

ASSESSMENT:

The Bel clamp is made up of two pieces and is secured on the tube after insertion to hold the silastic GJ tube in place. The images below outline how the Bel clamp is secured to the tube.

When caring for a child with a Corflo PEG J tube, check the Bel clamp to ensure that it is in the correct position and assess for any breaks or cracks. If the Bel clamp is broken or comes apart, the silastic GJ tube may become dislodged.

RECOMMENDATION:

Connected Care recommends the following to manage a Bel clamp that breaks or comes apart: 

• If a Bel clamp is broken, try to tape it in place to avoid movement or dislodgement of the silastic GJ tube. Contact your child’s G tube specialist to have the Bel clamp replaced. 

• If the silastic GJ tube is pulled out (partially or fully), do not try to push it back into the tube. Measure how much of the silastic GJ tube has dislodged using a measuring tape. 

  • If the silastic GJ tube is dislodged less than 5cm:  

    • Secure it in place with tape.

    • Continue to use the tube for fluid, nutrition and medications, if tolerated.

    • Contact your child's G tube specialist during business hours.

  • If the silastic GJ tube is dislodged more than 5cm:  

    • Secure it in place with tape. 

    • Do not use the tube for fluid, nutrition and medications.

    • The position of the tube will need to be fixed by an interventional radiologist. Contact your child's G tube specialist during business hours for this to be arranged. 

    • If this happens after hours and the child requires fluids, nutrition or medications, seek medical attention in the Emergency Department.

The following symptoms may indicate that the silastic GJ tube has migrated out of the small intestine and into the stomach. If you notice these signs or are concerned for tube migration, stop using the tube as the position needs to be confirmed.  

• Increased vomiting

• Vomiting formula

• Gagging and retching 

• Abdominal discomfort or pain 

• Bloated abdomen

• Diarrhea 

• Formula leaking out of G port during venting 

• Review the AboutKidsHealth article about Corflo PEG J tubes, managing dislodgements and tube migration. 

---

Have a Question? Initiate a Consult!